• Design and Application of a MCU-based Smart Contactor System
  • DOI: 10.4236/epe.2013.53B001   PP.1 - 5
  • Author(s)
  • Fuqing Huang, Weipeng Lin
  • This paper aims to design a MCU-based smart contactor system, which will realize functions of real time surveillance of contactors’ work status and data exchange with host computer, thus instantly reflect different status of the system. In case of abnormal status such as over-current or under-voltage, the contactor will be able to automatically cut off power supply to protect electrical load and the circuit. Through ARINC485 bus, system computer will collect and record contactor parameters, including contact voltage, contact current, supply frequency, contact temperature and contact status to provide critical data to the examination and repair of contactors.
  • Aerial Contactor; MCU; Testing; ARINC485
  • References
  • [1] X. L. WEI, “Example of MSP430 Series MCU Interface Design and System Design,” Publishing House of Beijing University of Aeronautics and Astronautics, Beijing, 2002.

    [2] Allegro MicroSystems Inc, “A1302 Databook,” 2005.

0 days
FaceBook Twitter skype Linkedin Sina
Important Dates
Submission Due:
    December 11, 2013>>  February 16, 2014
Acceptance notification:
    February 26, 2014
Camera-ready due:
    February 10, 2014
    April 16-18, 2014
Contact Us
Email: scet@engii.org
Tel: +86-151 7233 0844
QQ: 741494290
Past Conference: SCET2013
Past Proceedings: SCET2013

Copyright © 2014 Engineering Information Institute. All rights reserved.